[ Identification | Description | Input parameters | Links ]
TOF_PSDmonitor_toQ ComponentOne-dimensional Q-monitor. Calculates Q from "measured" time-of-flight, i.e. not from particle velocity parameters. Adapted from Kim Lefmann's TOF_cylPSDmonitor and PSD_monitors An n pixel Q-monitor based on measured Time of Flight detection. This component may also be used as a beam detector. Example: TOF_PSDmonitor_toQ(xmin=-0.1, xmax=0.1, ymin=-0.1, ymax=0.1, ny=90, nqbin=100, TOFmin=0.0, TOFmax=20000.0, filename="Output.psd")
| Name | Unit | Description | Default | |
| ny | 1 | Number of y bins (for discretisation of vertical detector dimension into "bins") | 90 | |
| nqbin | 1 | number of q bins | 500 | |
| xwidth | m | width of detector opening | 0.1 | |
| xmin | m | Lower x bound of detector opening | 0 | |
| xmax | m | Upper x bound of detector opening | 0 | |
| yheight | m | height of detector opening | 0.1 | |
| ymin | m | Lower y bound of detector opening | 0 | |
| ymax | m | Upper y bound of detector opening | 0 | |
| tmin | mu-s | Beginning TOF window | 0.0 | |
| tmax | mu-s | End TO window | 100000.0 | |
| qmin | AA^-1 | Start of q window | 0.005 | |
| qmax | AA^-1 | End of q window | 0.5 | |
| L1 | m | distance from source to sample (m) | 23.0 | |
| L2 | m | distance from sample to detector (m) | 3.0 | |
| detTheta | deg | Nominal detector theta | 0.91 | |
| filename | str | Name of file in which to store the detector image | 0 | |
| nowritefile | 1 | If set, detector will skip writing to disk | 0 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
TOF_PSDmonitor_toQ.comp.
[ Identification | Description | Input parameters | Links ]
Generated on mcstas 3.6.1