[ Identification | Description | Input parameters | Links ]
Mirror_surface ComponentThis is a Union surface process that describes a supermirror or other surface that only have specular reflection. The reflectivity can be given as a file or using the standard reflectivity inputs. To use this in a simulation an instance of this component should be defined in the instrument file, then attatched to one or more geometries in their surface stacks pertaining to each face of the geometry. Part of the Union components, a set of components that work together and thus sperates geometry and physics within McStas. The use of this component requires other components to be used. 1) One specifies a number of processes using process components like this one 2) These are gathered into material definitions using Union_make_material 3) Geometries are placed using Union_box / Union_cylinder, assigned a material 4) A Union_master component placed after all of the above Only in step 4 will any simulation happen, and per default all geometries defined before the master, but after the previous will be simulated here. There is a dedicated manual available for the Union_components Algorithm: Described elsewhere
| Name | Unit | Description | Default | |
| reflect | str | Name of reflectivity file. Format q(Angs-1) R(0-1) | 0 | |
| R0 | 1 | Low-angle reflectivity | 0.99 | |
| Qc | AA-1 | Critical scattering vector | 0.0219 | |
| alpha | AA | Slope of reflectivity | 6.07 | |
| m | 1 | m-value of material. Zero means completely absorbing. | 2 | |
| W | AA-1 | Width of supermirror cut-off | 0.003 | |
| init | string | Name of Union_init component (typically "init", default) | "init" |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
Mirror_surface.comp.
[ Identification | Description | Input parameters | Links ]
Generated on mcstas 3.6.1